System Boot:
TSC: P-state invariant, performance statistics
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
XSAVE Features=0x1<XSAVEOPT>
Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE>
AMD Features2=0x121<LAHF,ABM,Prefetch>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1
CPU: Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz (2097.62-MHz K8-class CPU)
mountroot: waiting for device /dev/gptid/854e0881-b4f3-11e7-865d-70106f47a52e...
da0: 953837MB (1953459632 512 byte sectors)
da0: Command Queueing enabled
da0: 135.168MB/s transfers
da0: Serial Number PDNNK0BRH1313N
da0: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device
da0 at ciss0 bus 0 scbus0 target 0 lun 0
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
kbd2 at ukbd0
ukbd0: <AVOCENT HP AF628A USBFS (PACER-I, class 0/0, rev 2.00/0.01, addr 3> on usbus0
ukbd0 numa-domain 0 on uhub7
ugen0.4: <AVOCENT HP AF628A USBFS (PACER-I> at usbus0
uhub7: 3 ports with 3 removable, bus powered
Root mount waiting for: CAM usbus0
uhub7: <Avocent General Purpose USB Hub, class 9/0, rev 2.00/80.00, addr 2> on usbus0
uhub7 numa-domain 0 on uhub2
ugen0.3: <Avocent General Purpose USB Hub> at usbus0
uhub6: 8 ports with 8 removable, self powered
uhub5: 6 ports with 6 removable, self powered
uhub4: 2 ports with 1 removable, self powered
uhub6: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus3
uhub6 numa-domain 0 on uhub3
ugen3.2: <vendor 0x8087 product 0x8002> at usbus3
uhub5: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
uhub5 numa-domain 0 on uhub0
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub4: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 1> on usbus0
uhub4 numa-domain 0 on uhub2
ugen0.2: <vendor 0x0424 product 0x2660> at usbus0
Root mount waiting for: CAM usbus0 usbus1 usbus3
uhub2: 21 ports with 21 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub1: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3
Trying to mount root from ufs:/dev/gptid/854e0881-b4f3-11e7-865d-70106f47a52e [rw]...
ugen2.1: <HP UHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
Timecounters tick every 1.000 msec
device_attach: est15 attach returned 6
est: cpu_vendor GenuineIntel, msr 1c4f00001700
est: CPU supports Enhanced Speedstep, but is not recognized.
device_attach: est14 attach returned 6
est: cpu_vendor GenuineIntel, msr 1c4f00001700
est: CPU supports Enhanced Speedstep, but is not recognized.
device_attach: est13 attach returned 6
est: cpu_vendor GenuineIntel, msr 1c4f00001700
est: CPU supports Enhanced Speedstep, but is not recognized.
device_attach: est12 attach returned 6
est: cpu_vendor GenuineIntel, msr 1c4f00001700
est: CPU supports Enhanced Speedstep, but is not recognized.
device_attach: est11 attach returned 6
est: cpu_vendor GenuineIntel, msr 1c4f00001700
est: CPU supports Enhanced Speedstep, but is not recognized.
device_attach: est10 attach returned 6
est: cpu_vendor GenuineIntel, msr 1c4f00001700
est: CPU supports Enhanced Speedstep, but is not recognized.
device_attach: est9 attach returned 6
est: cpu_vendor GenuineIntel, msr 1c4f00001700
est: CPU supports Enhanced Speedstep, but is not recognized.
device_attach: est8 attach returned 6
est: cpu_vendor GenuineIntel, msr 1c4f00001700
est: CPU supports Enhanced Speedstep, but is not recognized.
device_attach: est7 attach returned 6
est: cpu_vendor GenuineIntel, msr 1c4f00001700
est: CPU supports Enhanced Speedstep, but is not recognized.
device_attach: est6 attach returned 6
est: cpu_vendor GenuineIntel, msr 1c4f00001700
est: CPU supports Enhanced Speedstep, but is not recognized.
device_attach: est5 attach returned 6
est: cpu_vendor GenuineIntel, msr 1c4f00001700
est: CPU supports Enhanced Speedstep, but is not recognized.
device_attach: est4 attach returned 6
est: cpu_vendor GenuineIntel, msr 1c4f00001700
est: CPU supports Enhanced Speedstep, but is not recognized.
device_attach: est3 attach returned 6
est: cpu_vendor GenuineIntel, msr 1c4f00001700
est: CPU supports Enhanced Speedstep, but is not recognized.
device_attach: est2 attach returned 6
est: cpu_vendor GenuineIntel, msr 1c4f00001700
est: CPU supports Enhanced Speedstep, but is not recognized.
device_attach: est1 attach returned 6
est: cpu_vendor GenuineIntel, msr 1c4f00001700
est: CPU supports Enhanced Speedstep, but is not recognized.
device_attach: est0 attach returned 6
est: cpu_vendor GenuineIntel, msr 1c4f00001700
est: CPU supports Enhanced Speedstep, but is not recognized.
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
atkbd0: [GIANT-LOCKED]
kbd0 at atkbd0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff pnpid ORM0000 on isa0
uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0
cpu0: <ACPI CPU> numa-domain 0 on acpi0
isa0: <ISA bus> numa-domain 0 on isab0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci1
usbus3: 480Mbps High Speed USB v2.0
usbus3 numa-domain 0 on ehci1
usbus3: EHCI version 1.0
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x93300000-0x933003ff irq 18 at device 29.0 numa-domain 0 on pci1
pci16: <ACPI PCI bus> numa-domain 0 on pcib16
pcib16: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci1
pci15: <ACPI PCI bus> numa-domain 0 on pcib15
pcib15: <ACPI PCI-PCI bridge> irq 18 at device 28.6 numa-domain 0 on pci1
pci14: <ACPI PCI bus> numa-domain 0 on pcib14
pcib14: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci1
usbus2: 12Mbps Full Speed USB v1.0
usbus2 numa-domain 0 on uhci0
uhci0: <HP iLO Standard Virtual USB controller> port 0x1300-0x131f irq 19 at device 0.4 numa-domain 0 on pci13
vgapci0: Boot video device
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92a88000-0x92a8bfff,0x92000000-0x927fffff irq 19 at device 0.1 numa-domain 0 on pci13
pci13: <ACPI PCI bus> numa-domain 0 on pcib13
pcib13: <ACPI PCI-PCI bridge> irq 18 at device 28.2 numa-domain 0 on pci1
pci12: <ACPI PCI bus> numa-domain 0 on pcib12
pcib12: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci1
usbus1: 480Mbps High Speed USB v2.0
usbus1 numa-domain 0 on ehci0
usbus1: EHCI version 1.0
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x93301000-0x933013ff irq 18 at device 26.0 numa-domain 0 on pci1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus0 numa-domain 0 on xhci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x39ffff00000-0x39ffff0ffff irq 19 at device 20.0 numa-domain 0 on pci1
pci1: <unknown> at device 17.0 (no driver attached)
pci11: <ACPI PCI bus> numa-domain 0 on pcib11
pcib11: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 0 on pci1
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
pcib10: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 0 on pci1
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
pcib9: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 0 on pci1
ix1: netmap queues/slots: TX 8/2048, RX 8/2048
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: Ethernet address: 14:02:ec:90:b7:e1
ix1: allocated for 8 rx queues
ix1: allocated for 8 queues
ix1: Using MSI-X interrupts with 9 vectors
ix1: Using 8 RX queues 8 TX queues
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0x2000-0x201f mem 0x92b00000-0x92bfffff,0x92d00000-0x92d03fff irq 16 at device 0.1 numa-domain 0 on pci8
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: Ethernet address: 14:02:ec:90:b7:e0
ix0: allocated for 8 rx queues
ix0: allocated for 8 queues
ix0: Using MSI-X interrupts with 9 vectors
ix0: Using 8 RX queues 8 TX queues
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0x2020-0x203f mem 0x92c00000-0x92cfffff,0x92d04000-0x92d07fff irq 17 at device 0.0 numa-domain 0 on pci8
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib8: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci1
igb1: netmap queues/slots: TX 8/1024, RX 8/1024
igb1: Ethernet address: 70:10:6f:47:a5:2f
igb1: Using MSI-X interrupts with 9 vectors
igb1: Using 8 RX queues 8 TX queues
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x3000-0x301f mem 0x92e00000-0x92efffff,0x93000000-0x93003fff irq 36 at device 0.1 numa-domain 0 on pci7
igb0: netmap queues/slots: TX 8/1024, RX 8/1024
igb0: Ethernet address: 70:10:6f:47:a5:2e
igb0: Using MSI-X interrupts with 9 vectors
igb0: Using 8 RX queues 8 TX queues
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x3020-0x303f mem 0x92f00000-0x92ffffff,0x93004000-0x93007fff irq 32 at device 0.0 numa-domain 0 on pci7
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
pcib7: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 0 on pci1
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib6: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 0 on pci1
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
pcib5: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 0 on pci1
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib4: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci1
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
pcib3: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci1
ciss0: PERFORMANT Transport
ciss0: <HP Smart Array H240> port 0x4000-0x40ff mem 0x93100000-0x931fffff,0x93200000-0x932003ff irq 16 at device 0.0 numa-domain 0 on pci2
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib2: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci1
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
acpi_syscontainer0: <System Container> on acpi0
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <ACPI PCI bus> on pcib0
pcib0: <ACPI Host-PCI bridge> on acpi0
apei0: <ACPI Platform Error Interface> on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
Event timer "HPET7" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET" frequency 14318180 Hz quality 350
Timecounter "HPET" frequency 14318180 Hz quality 950
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "i8254" frequency 1193182 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
acpi0: Power Button (fixed)
acpi0: <HP ProLiant> on motherboard
padlock0: No ACE support.
cryptosoft0: <software crypto> on motherboard
vtvga0: <VT VGA driver> on motherboard
nexus0
mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019)
[ath_hal] loaded
random: fast provider: "Intel Secure Key RNG"
random: registering fast source Intel Secure Key RNG
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xffffffff8140c3e0, 0) error 19
000.000018 [4336] netmap_init netmap: loaded module
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80765890, 0) error 1
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff807657e0, 0) error 1
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80765730, 0) error 1
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8073dea0, 0) error 1
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8073ddf0, 0) error 1
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8073dd40, 0) error 1
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
random: entropy device external interface
wlan: mac acl policy registered
Timecounter "TSC" frequency 2097619104 Hz quality 1000
Launching APs: 1 13 4 9 8 7 6 12 11 5 15 3 2 10 14
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: unblocking device.
FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
ACPI APIC Table: <HP ProLiant>
Event timer "LAPIC" quality 600
avail memory = 16436482048 (15675 MB)
real memory = 17179869184 (16384 MB)
TSC: P-state invariant, performance statistics
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
XSAVE Features=0x1<XSAVEOPT>
Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE>
AMD Features2=0x121<LAHF,ABM,Prefetch>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1
CPU: Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz (2097.62-MHz K8-class CPU)
VT(vga): resolution 640x480
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
FreeBSD 12.2-STABLE 1b709158e581(RELENG_2_5_0) pfSense amd64
FreeBSD is a registered trademark of The FreeBSD Foundation.
The Regents of the University of California. All rights reserved.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Copyright (c) 1992-2020 The FreeBSD Project.